Prices. Known beforehand, the same afterwards.
Fixed prices for the work described, including 20 % VAT. If the situation on site turns out to be different, we say so before we start. The call-out is charged once per visit, anywhere in Vienna. Where a range is shown, the grey line says what moves it, and we name the fixed price after we have looked at the job.
- Call-out anywhere in Vienna, once per visit
- 69 €
- Hourly rate per hour, outside the list
- 118 €
- Emergency base price, Monday to Friday, 7 to 17
- 149 €
Three kinds of price
Every job on this page falls into one of them. Which one is stated with the job.
Fixed price
For standard work in flats. The price is on this page, applies anywhere in Vienna, and does not change if we take longer.
Examples. Replace a socket 69 €, mount a lamp 69 €, install an RCD 189 €, E-Befund up to 50 m² 249 €.
Hourly rate
For work that is not on the list and does not need a site visit. 118 € per hour, per started 15 minutes after the first half hour. We say beforehand what you can expect.
Examples. Fault finding outside the emergency service, connecting balcony solar, small appliance repairs. Emergency calls instead go at the base price for the time band, from 149 €.
Quote after a site visit
For anything larger. We come and look, and before work starts you get a written fixed price with a schedule. The visit is free if you go ahead, and if you do not we charge the call-out.
Examples. Replace the whole fuse box 1.290 to 2.490 €, rewire a flat 120 to 180 € per m², 11 kW wallbox 990 to 1.490 €. The ranges show what you can expect in a Vienna flat.
The price board
Seven groups, each written as a question. What is not here we come and look at, and name a written fixed price beforehand.
All prices include 20 % VAT. Call-out anywhere in Vienna 69 €, once per visit. Small materials up to 10 € included.
What does a socket cost?
Prices per unit where the cable is already in place. New cabling and chasing work are quoted after we have seen the job.
| Job | Price incl. VAT |
|---|---|
| Replace a socket or switch | 69 € |
| incl. Removal, Fitting a standard white unit, Function test | |
| Fit a new socket (cable already in place) | 89 € |
| incl. Connection to the existing cable, Standard back box and frame, Testing (Chasing and plastering not included) | |
| Each further socket in the same room | 59 € |
| incl. Connection, Standard unit, Testing | |
| Fit a new socket including new cabling (flush mounted) | 140 to 220 € |
| incl. Cable run up to 5 m, Chasing and rough filling, Testing (Decorating not included). The range is moved by cable length, wall construction and the amount of chasing. | |
What does mounting a lamp cost?
| Job | Price incl. VAT |
|---|---|
| Mount a lamp or ceiling light (connection in place) | 69 € |
| incl. Mounting up to 3 m ceiling height, Connection, Function test | |
| Each further light fitting on the same visit | 49 € |
| incl. Mounting, Connection | |
| Fit LED spots (per unit, cut-out in place) | 39 € |
| incl. Fitting, Connection | |
| Fit a dimmer or motion sensor | 99 € |
| incl. Unit as agreed, Fitting, Setting up | |
What does an RCD or a new consumer unit cost?
Breakers and RCDs at the fixed price from the list. Consumer units are quoted after a visit, and the ranges show what you can expect in a Vienna flat.
| Job | Price incl. VAT |
|---|---|
| Replace a miniature circuit breaker (MCB) | 79 € |
| incl. Breaker up to 16 A, Fitting, Testing | |
| Install or replace an RCD (FI-Schalter) | 189 € |
| incl. RCD 40 A / 30 mA, Fitting in the existing consumer unit, Measurement and report | |
| Partly renew the consumer unit (up to 12 modules) | 490 to 890 € |
| incl. New breakers and RCD, Labelling, Test report. The range is moved by the number of modules, the condition of the cabling and the space in the unit. | |
| Replace the whole consumer unit (flat) | 1.290 to 2.490 € |
| incl. New consumer unit, RCD and breakers, Connection of every circuit, Test report (Meter replacement, which is done by Wiener Netze not included). The range is moved by the number of circuits, the meter position and how much space there is. | |
What does an E-Befund cost?
Inspection to ÖVE/ÖNORM E 8101 with a written report as a PDF.
| Job | Price incl. VAT |
|---|---|
| E-Befund, flat up to 50 m² | 249 € |
| incl. Visual inspection, Measurements, Report as a PDF | |
| E-Befund, flat 50 to 100 m² | 329 € |
| incl. Visual inspection, Measurements, Report as a PDF | |
| E-Befund, flat over 100 m² | 429 € |
| incl. Visual inspection, Measurements, Report as a PDF | |
| E-Befund, detached house | 590 to 890 € |
| incl. Every circuit, Report as a PDF. The range is moved by floor area, the number of circuits and any outbuildings. | |
What does a new electrical installation cost?
Complete rewiring in flats, old buildings and new builds. Fixed price after a site visit.
| Job | Price incl. VAT |
|---|---|
| Rewire a whole flat (flush mounted) | 120 to 180 € per m² |
| incl. Cabling, back boxes, consumer unit, Standard switch range, Test report (Decorating, Light fittings not included). The range is moved by wall construction, the number of outlets and the specification. | |
| Rewire a single room | 690 to 1.490 € |
| incl. Cabling and back boxes, Connection, Testing. The range is moved by room size, the cable route and the number of outlets. | |
| Site visit and written quote | free |
| incl. Appointment on site, Written quote with a fixed price. Free if you go ahead with the job. If you do not, we charge the call-out, 69 €. | |
What does wallbox installation cost?
Prices for mounting and connection, the wallbox unit itself is not included. Registration with Wiener Netze is.
| Job | Price incl. VAT |
|---|---|
| Mount and connect an 11 kW wallbox (cable run up to 10 m) | 990 to 1.490 € |
| incl. Cabling and protection, RCD type B or A-EV, Registration with Wiener Netze, Commissioning (The wallbox unit, Core drilling not included). The range is moved by the cable route, any core drilling and the protection required. | |
| Wallbox check on site (feasibility and quote) | 69 € |
| incl. Check of the house connection and consumer unit, Written quote. Credited against the job if you go ahead. | |
What does connecting a cooker or an appliance cost?
| Job | Price incl. VAT |
|---|---|
| Connect a cooker or hob (connection in place) | 129 € |
| incl. Connection, Function test | |
| Connect a washing machine or dishwasher electrically | 89 € |
| incl. Connection to the existing socket or box, Testing | |
| Repair a doorbell or intercom | 89 to 189 € |
| incl. Fault finding, Repair or replacement of a standard unit. The range is moved by whether a repair is enough or the unit has to be replaced. | |
Prices valid from 01.09.2026 (placeholder, fixed before launch).
Common jobs, with the price from the list.
What does an emergency call cost?
Base price per time band, including the call-out anywhere in Vienna, fault finding and 30 minutes of work. Below it, what we never charge for.
The base price covers the call-out anywhere in Vienna, fault finding and the first 30 minutes of work. After that we charge per started half hour.
| Time band | Base price | per further half hour | Call |
|---|---|---|---|
| Monday to Friday, 7 to 17 | 149 € | 45 € | 0667 798 00 03 |
| Monday to Friday, 17 to 22 | 199 € | 55 € | 0667 798 00 03 |
| Saturday, 7 to 22 | 199 € | 55 € | 0667 798 00 03 |
| Sunday and public holidays, 7 to 22 | 239 € | 65 € | 0667 798 00 03 |
| At night, 22 to 7 (subject to availability) | 279 € | 75 € | 0667 798 00 03 |
Call0667 798 00 03
- You hear the price on the phone, and we confirm it in writing on site before we start.
- Small materials up to 10 € are included. Spare parts such as RCDs or breakers are named beforehand and shown separately on the invoice.
- Pay by card, bank transfer or cash. You always get an invoice.
No hidden extras
What you get
- Call-out anywhere in Vienna, there and back
- Fault finding and the first 30 minutes of work
- Small materials up to 10 €
- The price on the phone, confirmed in writing on site
- An invoice, with a test report on request
Possible extra costs
- Each further started half hour, at the price in the table
- Material over 10 €, named beforehand and shown separately on the invoice
- Spare parts such as RCDs or circuit breakers at list price
- The call-out, if no job follows a site visit
What we never charge
- Travel time or mileage beyond the call-out
- Surcharges that are not published on this website
- Fault finding as a separate item, it is inside the base price
- Agency fees, you call the business directly
- A second call-out because we forgot a part
Prices valid from 01.09.2026 (placeholder, fixed before launch).
The awkward questions
What happens if it takes longer, if we do not find the fault, if you cancel after the site visit.
What happens if it takes longer than planned?
With a fixed price, nothing. It holds for the work described, even if we take longer. On the hourly rate we charge 118 € per hour, per started 15 minutes after the first half hour, and we say beforehand what you can expect. If something on site turns out different from what we agreed, we say so before carrying on, and you decide.
Do I pay if you do not find the fault?
Yes, the call-out and the time spent fault finding are work. On an emergency call the fault finding is inside the base price, from 149 €, otherwise the hourly rate applies. You get in writing what we checked and ruled out, so the next step does not start from zero.
Is the site visit really free?
If you go ahead, yes. If you do not, we charge the call-out, 69 €, and nothing more. The written quote itself costs nothing, and you can compare it at your leisure.
Does the fixed price hold if it goes faster?
Yes, both ways. Someone whose socket takes twenty minutes pays the same as someone whose socket takes an hour. The price is for the work, not for the time.
Your job is not on the list?
Send us a short note about it. We name the price up front or come and look. During business hours we usually get back to you within an hour, otherwise by 9 a.m. on the next working day.